Please note: due to the amount of Spam email we receive as a result of having our email addresses on this website, we have substituted the @ symbol for the letters -AT- simply remove the -AT- and replace with the @ symbol to email us.

Winchshop For complete specifications on our full range of hand and electric winches please visit www.winchshop.co.uk

Click here to download your Winch Enquiry and Order Form

Electric Winch Type HD-EL

Lifting Capacity 125Kg -2000Kg

Compact and robust design
Power supply 400V, 3phase, 50Hz or 230V, 1Phase, 50Hz
Enclosure IP54 protection Insulation class B
Overload protection from 1000 kg and above

Options

Low voltage controls
Pendant or wall mounted control switch
Grooved rope drum
Travel limit switches
Disengaging clutch
Dual hoisting speeds

Electric Winch to BGV C1 German Safety Regulation

Modern design
Completely enclosed winches (IP 54), unaffected by environmental influences
Compact, space-saving construction; brake-motor built into the drum; insulation to class F as standard, for ambient temperatures up to 60ÁC
Simple replacement of all wearing parts. Minimum lubrication requirement- only one lubrication point, oilbath lubricated planetary gear box
Cable wound on one layer only
Large drum diameter with milled rope grooves protects wire ropes from premature wear
Multi rope operation possible
Rope pressing roller
Electronic overload protection the winch is instantly stopped on reaching the preset overload limit
Brake release device for hand operation

Pile Wind Winch - Manual and Battery Operation

250 or 500kg manually operated or battery driven winches. Designed for multi-purpose theatrical applications
Operation is achieved by simply applying a crank or battery drill to the main drive shaft with a 27mm hexagonal socket and drill to socket adaptor
Contained within a protective steel cover, the pile wind winch has a drum capacity of 10 metres and up to five suspension cables. An integral, self-sustaining gearbox supports the load
Rigid steel back plate with six fixing holes allows the winch to be mounted securely
The winch size makes it possible to maintain 400mm cable centres. The wire ropes can enter the drum from above or below
The winch has been designed to ensure that it can be totally stripped down into three manageable sections
The design allows additional lines to be retro-fitted to the winch
In the event of power failure, the load can be raised or lowered by hand using a separate, higher ratio drive shaft

Safety

For the safe operation of the Pile Wind Winch, we recommend that an 18 volt battery drill is used (Makita or equivalent). To maintain the working efficiency of the drill, we recommend that only light loads of up to 75kg are raised and lowered by this method.

For higher loads, we recommend that a DeWalt DW-130 or equivalent electric drill be used.

Please Note: Drill, sockets or adaptor are not supplied with winch.

Pile Wind Winch - Electrically Operated

125kg, 250kg or 500kg lifting capacity

Designed for multi-purpose theatrical and applications, black paint finish
The Pile Wind Winch alleviates the strain of hand winding
An integral self-sustaining gearbox supports the load with a safety factor of 5:1
Fail-safe integral motor brake
A rigid steel back plate with six fixing holes allows the winch to be mounted securely
The winch size makes it possible to maintain 400mm cable centres
The housing allows for the wire ropes to enter the drum from above or below
The Pile Wind Winch has been designed to ensure that it can be totally stripped down into three manageable sections
The design allows for additional lines to be retro-fitted to the winch
Each winch is supplied with wall mounted control panel, including push and hold buttons
Ultimate gear travel limit switches are included

DOWNLOAD PDF Download Specifications as a PDF